Every new phone deserves to be protected, especially when you have an all-glass Samsung S8/S8+. I owned the much more fragile S7 Edge with its steeper curved display. There wasn’t a day where I wouldn’t have the phone in a case unless I was briefly taking it out for a cleaning. Since Samsung opted for an elegant, unique design with the S8, the display is costly to replace. I haven’t seen the official cost to repair the phone's display yet; although I’d imagine it’s more than the $250 for the S7 Edge. No case will guarantee 100% protection for your phone, but it will provide significantly more protection than no case at all.I will include numerous types of cases in this roundup from different companies. Feedback is always welcome, along with any questions. If there is a certain case you would like to see, drop me a comment below, and I’ll do my best to add it.My S8+ has a screen protector installed with all the reviews. I opted for a simple wet install film after experiencing the many failures of glass screen protectors during my S7 Edge and now S8+ ownership. So far, I have found the case-friendly versions of these films work with most cases. If there happens to be an issue, I’ll do my best to note it where applicable.

Overview Table

Speck Presidio Grip

Some people who read my earlier Pixel XL case comparison will know how I enjoy Speck cases. Their durability and feel are virtually unmatched. Pricing for their Presidio Grip line ranges from $40-45, and Amazon is usually a good place to find the case. Speck offers this case in a variety of colors, and even without the outer grip.

You won’t find any corners cut or edges broken here; Speck has hit another home run. The slanted rubber grips provide excellent slip resistance even with slightly wet hands. I appreciated the grip more when I was in the field visiting job sites. Now, the same welcoming grip helps prevent my phone from sliding off my desk, or across my center console.

The shell is composed of a very subtly textured polycarbonate, and the inner part is a soft, impact absorbing material. Speck has come a long way from their gigantic logo days - it's now just a tiny symbol in the upper right-hand corner of the case. And really, no case should have massive branding on the back. You won’t have to worry about flash ghosting, either, since Speck has placed a black ring around the camera cutout. Speaking of cutouts, I found no issue using the awkwardly placed fingerprint scanner, or heart rate monitor (HRM) with this case.

Inside, the edges are lined with skeletal looking chambers to help mitigate damage in the event your phone is dropped. (Remember how I mentioned the gigantic Speck logo earlier on? Now it lives inside the case, out of sight.) Each button has a very snappy tactile click.

Overall I could not be happier with Speck's latest case. My expectations for their products are always high; thankfully I was not disappointed. I cannot recommend their cases enough. The excellent track record they’ve had over the years speaks for itself.

THE GOOD

THE NOT SO GOOD

Tech 21 EVO Check

TPU cases come in many variants, but none are quite like what Tech 21 offers. I haven’t found any TPU cases that come with a lifetime warranty or the unique design of Tech 21. Their cases aren’t inexpensive given their MSRP, but if you're looking for a slim, no-nonsense case, this one could be for you.

Tech 21 was nice enough to send me not one or two, but four EVO Check cases. I’m excited to see the whole color lineup for once because without variety using your phone can get boring. I’m sure many of you prefer a black case at work, so why not have fun with a more colorful one at home?

Let’s start things off by looking at the case's outward appearance. The small checkered grid lines are raised a subtle amount to help protect your phone when it falls. Alongside the lower portion of the back, you will find a small Tech 21 logo (it could be smaller).

Both the top and bottom have been reinforced with thicker TPU giving you excellent drop protection. One downside to this added thickness is the larger-than-normal bottom cutouts. As a result, the case can become uncomfortable for some people to hold via the pinky-supported one-handed method.

I’ve found both the black and white cases to compliment my black S8+ better than the brightly colored ones my wife enjoys. Depending on your preference and phone's color, the brighter greenish blue or pink might suit you. My wife has a silver S8+ which looks great with all the cases, unlike my black one.

Unfortunately, there is an issue with the buttons. This isn’t something new to Tech 21 cases, but the buttons are awful to use initially. I’m talking about using some pliers to squeeze them due to how hard they are up front. I wanted to give the case a chance, though, so I used one for several days, and I can say the buttons do break in with use. They are now much easier to press and provide good - but not perfect - tactile feel. I suspect as time goes on the buttons will only improve more.

If you intend on using a dbrand skin, I’m sorry to say their added thickness will impair the phone's fit in these cases. I had no issues without a skin, but once I installed mine, it made the buttons unusable. I would advise against putting a skin on if you plan to use these cases.

Despite the button issue, the Tech 21 EVO Check proved to be a worthy contender for my favorite S8+ case. I particularly like the white one - it gives my phone a nice Stormtrooper look without compromising protection.

THE GOOD

THE NOT SO GOOD

Otterbox Defender

When size isn’t a concern and you want the perceived ‘best’ protection, the Otterbox Defender is usually the first option to come to mind. Even with the $60 price tag, these cases sell, and for good reason. Amazon is usually your best bet to find one at a slightly better price than your local carrier store or big box retailer.

First, I want to state I am not a fan of bulky cases that still only provide average levels of protection. Otterbox used to stand alone in regard to impact resistance, but now, many slimmer cases offer the same protection with a lower profile. No matter what case you have on your phone, there's always some chance it may break when dropped, and the infamous Defender series is no exception.

Still, I want to applaud Otter Products (Otterbox’s parent company) for finally making their Defender slimmer. I compared it to my Pixel XL version and they managed to shave off about 5.5mm of bulk. That’s no small number when it comes to a case.

This new Defender does not feature the horrid built-in plastic screen protector, and I could not be happier with Otterbox's decision to remove this monstrosity. I know some people are likely to get upset about it, but there are better options out there - especially when you have a curved display.

On Otterbox's site, you can even customize your Defender for your particular phone, choosing the inner and outer shell’s colors. Of course, there is an added cost for this luxury ($10), but if I were a fan of the Defender, I would pay it. I was sent two different color Defender cases, so I had the chance to mix and match their parts for fun.

Each case is put through a suite of tests by Otter that includes drops, abrasion, chemicals, etc. I haven’t found the exact height used for their drop tests, but I would guess it’s at least 10' like most other cases. There are technically three layers of protection built into this case. First, you have the exterior slip cover, then the inner plastic shell, and finally a foam absorbent lining inside this shell. I have an issue with the inner plastic: it literally creaks like an old door while using the phone. I’m not sure if this is a common issue, but both of my Defenders exhibit this behavior The inner shell also messes with my film screen protector. After removing the phone, the inner shell would pull up my screen protector on one side. I found this to be caused by the tight fit. Of course, this won’t be an issue if you plan on simply leaving your phone inside the case.

Moving along to the outside you are met with the usual USB and headphone jack covers. I see no reason to have these when the S8+ has an IP68 rating against dust and water. The port covers cause a lot of unnecessary stress on any USB-C cable plugged into your phone, too. I can see this potentially expediting the wear on the port, so I recommend using wireless charging with one of these cases. (I tested my phone on both generations of the charging stand without any issues.)

There is ample grip with the Defender - not quite up to Speck’s level, though. There is also a nice bevel on the back to help you find the elusive fingerprint scanner. All the buttons function fine and feature the same smooth texture. I wouldn’t say they’re perfect, but the buttons have no issues clicking.

Alongside your case, there is an included belt holster if you want to feel super cool - it's just a simple belt holster with a strong clip. I know the case is still huge, and you probably need the holster because skinny jeans don’t like big things fitting in them. The cool kids use belt holsters, just like anyone who works in the field/construction or other industrial areas. You can orient the phone vertically or horizontally, too, making the holster a little more versatile.

While the Defender is not my cup of tea, I can see why it appeals to some people. There are issues, such as the creaking and the screen protector getting pulled up when removing the case. But, other than those small things which probably won’t affect most people, I think Otter Products made the same case they always have. If you feel you need a Defender, then get one; otherwise, I wouldn’t.

THE GOOD

THE NOT SO GOOD

Caseology Parallax

Caseology is a new experience for me, having only bought them for my wife previously. She likes their styling more than I have in the past. Their Parallax case offers stiff competition for Spigen given their similarities, but the Parallax sells for on Amazon - less than what Spigen charges for their NeoHybrid case. Spoiler alert: the Caseology version is much better.

In the cut-throat phone accessory market, you either make a good product, fix your current one, or die off. Spigen has neglected to fix their NeoHybrid case's flaws since at least the Nexus 6 era. Caseology stepped up their game with the Parallax, which is an excellent hybrid case.

There is an awesome looking and feeling geometric pattern on the backside and, unlike other similar cases, the texture here does add grip as well as look good. I was sent a few different colors of the Parallax ranging from the vibrant burgundy and rose gold to your usual black on black. There was one odd color in the batch, Orchid Grey, which is rather subtle. The color reminds me of Spigen’s Metal Slate with less pigment. I have a hard time distinguishing this color from the black version.

As I would expect from a case of this quality, the buttons are excellent. I especially enjoy how Caseology tapered the edge of their rear cutout. The HRM has a larger grove, while the fingerprint scanner one is more subdued. This allows you to easily tell which is which while using the case. Let’s not forget how the plastic band around this case doesn’t bow outward like a certain other brand. Caseology nailed the design here.

No drop rating is listed for this case, although I suspect it can handle at least 5' based on experience. I have dropped my S8+ a few times already due to my clumsiness. My tile floor at home didn’t hurt the case or my phone, thankfully.

I think Caseology is a great company based on what I’ve seen so far; I own a few other cases from them which will also be added here later. Most of them are ones I’d buy in the future, and with prices lower than Spigen, Caseology offers great design without the compromises. Needless to say, I recommend this case to anyone wanting style.

THE GOOD

THE NOT SO GOOD

Spigen NeoHybrid

Spigen has yet again slightly changed the design of their beloved NeoHybird series, and I have mixed feelings about the current version despite some improvements. Currently, Amazon has the case listed for $15-18 depending on the color.

Spigen has tried to eliminate the outer band from bowing around the volume and power buttons with a revised design. I found the issue to persist, albeit in a lesser form. Their color portfolio has improved with an all-black version and some cool combinations, including a red and gold that's a bit Iron Man-esque. The back texture has a pleasant appearance, but puts aesthetics above functionality. Despite the appearance of a ‘grippy’ surface, the texture is very slick.

My Shiny Black NeoHybrid had its outer band get extensively scratched after a few short uses. I firmly believe cases should at least hold up to moderate usage without showing signs of wear within the first month. My wife particularly enjoyed her Violet/Gold NeoHybrid even with the slippery lack of texture, and hers didn’t show as much wear due mostly to the different finish on the plastic outer band. Along the back, there is an extended band whose purpose is to offer some rigidity to the case. I found this section on the lower back to occasionally pop out of the TPU shell, much to my displeasure.

Nothing is new with the buttons, all offer a nice click. Some changes have been made to the button cutouts since their S7 Edge model I last had. Most importantly, the plastic bumper no longer fully envelopes the buttons, allowing for less restricted movement. The camera cutout also has a slight bevel for easier sensor access. Each cable I tested worked just fine, including the factory one, thanks to the decent cutouts.

Still, there is absolutely no reason I can recommend their NeoHybird over Caseology’s Parallax after using both. Spigen needs to improve their NeoHybrid by fixing the outer band bowing issue and adding a little more grip. I’m still happy to see their cases getting a little better each time.

THE GOOD

THE NOT SO GOOD

Otterbox Symmetry

The Symmetry is Otterbox’s slimmest case. Conventionally, Otterbox made this series in plain colors like their Defender. Now, you can also buy metallic and clear versions on Amazon from - depending on the color combination.

Unfortunately, I find the case to lack any form of durability because of how Otterbox finished the back.

I don’t have many kind words for this case other than its initial resemblance to the silver S8+. I was outside taking pictures of the case before using it so I could get pictures in case it got damaged. My fears were immediately realized when I picked the case up from my brick backdrop only to find significant scratches. Keep in mind I was very careful while posing the case for pictures as I always am. To me, this was an immediate red flag given the high price tag. I contacted Otterbox regarding the design flaw, and I’m currently awaiting their response.

Aside from the awful choice of materials and metallic finish, I found the Symmetry to be a very pleasant-to-use case. You will find some bulk, more than Speck’s Presidio Grip in addition to the slippery backside. Branding on the back is a turn-off for me when it comes to this case. This is especially annoying when their logo is plastered along the side above your power button, too! One logo on a case is enough, and I would appreciate if Otterbox removed the back logo in favor of a side-only one. It should be very obvious who makes the case even without giant branding everywhere given their reputation.

One pleasant surprise was how well the buttons work relative to those on their Defender series. I usually expect bigger cases to have issues offering tactile feedback because of the heavy-duty materials. Thankfully, they all function just fine on the Symmetry. You also get a nice sloping cutout to help locate the fingerprint scanner. The same luxury isn’t given to the HRM, which most people won’t mind. Per the Otterbox style, their 'go big or go home' trend continues with the oversized port cutouts. Honestly, 99.9% of cases have no issues fitting most USB-C cables. I haven’t run into that problem since my Nexus 6P. The same goes for the 3.5mm headphone jack. I use a variety of headphones ranging from your standard Bose QC 35’s to my B&O earbuds; even my large PC headphones fit just fine.

When this review was first written I only had the metallic Symmetry case. After speaking with Otterbox, I was informed that my silver Symmetry was likely defective. Otterbox then sent me a standard black non-metallic version. After using the case for a day now, I’m happy to say the issues are not present with this version. I found the normal material to hold up significantly better, while also having more grip than before. If Otterbox sends me another metallic case, I’ll add an update to the review with any changes.

Right now I would stay away from their metallic Symmetry and instead buy the normal one. Every issue I listed stemmed from the awful metallic case. Now that I have the standard one, things are great.

THE GOOD

THE NOT SO GOOD

UAG Monarch

UAG makes some interesting rugged alternatives to Otterbox. The case I was sent comes from their heavy-duty Monarch line, presumably meant to compete with the Otterbox Defender. Interestingly, the price is identical; Amazon has the UAG Monarch listed for $59.99.

When I first picked up this case I was immediately met with some disappointment. The whole outside is very smooth, even with the The Thing-inspired outer grips. UAG says there are five layers to this case. I will attest to that statement, but I see no benefit to them. The faux screws remind me of the tacky Supcase Beetle from a few years back. If these screws served a purpose, I could see including them. Otherwise, it looks tacky. I found this case to be even more cumbersome than my Defender because the edges are more squared off. This design led to a very bulky, uncomfortable feel, eclipsing even obnoxious folio cases.

Each layer feels tackier than the last. First, the outer shell is a plastic (polycarbonate) like material. I would have preferred to see the first line of defense to be TPU, or a better impact dispersing material. Next, there is “top grain leather” that certainly feels fake (recall Samsung’s Note 3). Following the ‘leather,’ there’s a rubber layer before the final alloy hardware. The alloy hardware does not interfere with NFC, Samsung Pay, or wireless charging from what I’ve seen. At some point, I think UAG was trying to do anything to set their case apart from the ever-growing crowd. UAG also really wants the world to know you have a UAG case, via a massive logo stamped right in the middle.

I found wireless charging to work despite the previously-mentioned alloy hardware inside the case. One thing I found useful about the numerous layers was the inclusion of a fingerprint cutout. While I don’t use the fingerprint scanner on my S8+ more than a few times a week, this might be useful to others who do. UAG put some thought into the buttons, unlike other companies. The pointless Bixby key and power button both feature a nice aggressive texture, while the volume rocker is smooth. Despite this, the buttons don’t stick out far enough, making it hard to locate them on occasion. Thankfully, each one functions fine once you’re able to wrestle your thumb up the case.

UAG tried to put too much work into differentiating this case from others, though, and it's an unappealing mess. I would happily buy other bulky cases over this one because they follow the S8+’s curved back better. No one wants to hold a boxy case just because a company wants to be different. I would look elsewhere before giving UAG a try with their Monarch series. Perhaps the conventional Plasma series would be a better bet. I don’t have one, so I cannot say with any certainty that it would be better.

THE GOOD

THE NOT SO GOOD

CM4 Silk

CM4 was not a company that I'd heard of before some of their cases showed up at my door. Their Silk series cases I received appear to offer a nice mix of grip and slimness for a relatively low price of ~.

I have some slim TPU cases currently that will be reviewed later, but none are quite like the CM4 Silk. I found their combination of textures to be quite enjoyable compared to the usual Spigen or Ringke TPU offerings. Along the sides, there is a nice lightly-textured border that does provide some grip. The backside is thankfully smooth, because having the same texture can sometimes hurt more than it helps. I truly enjoy how lightweight it feels, the CM4 Silk might even weigh less while also offering more protection than my Spigen thin-fit, which is quite a feat.

Due to the case’s thin profile, the sides will pull away from your phone. I fear the thin material could be troublesome in the event of a drop. The last thing anyone wants is for their phone to pop out of its case when it hits the ground. I’m not going to test this for the sake of a review because I like my S8+ and would prefer the screen to remain functional. Branding is subtle here, down on the lower back corner, though I would prefer logos to stay along the edge of a case. It could be much worse, so I’ll try to ignore it given its size.

The blue-colored version features a black ring around the camera cutout to prevent the flash from flaring in pictures. Each cutout seems to be adequately sized as to not interfere with regular cables/headphones. Due to the thin sides, the buttons work exceptionally well.

CM4 made a compelling case that isn’t without some flaws. I would have liked the sides to be a little firmer, but other than that this case is great. I prefer the low profile over some others that I’m currently testing, especially with the textured sides. For $8 you can’t go wrong, if you don't mind a little less protection for the sake of superior comfort.

THE GOOD

THE NOT SO GOOD

Spigen NeoHybrid Crystal

THE GOOD

THE NOT SO GOOD

• Price: $15-18 (S8, S8+)
• Colors: Gunmetal, Gold Maple, Blue Coral, Orchid Gray
• Type of case/material: This case has a strange combination of materials compared to Spigen's normal NeoHybrid. The back is polycarbonate, as is the frame, but the clear sides are made from TPU. There is a problem with this material combination and design. The polycarbonate back seems to lack any form of a scratch-resistant coating. I found mine to scratch almost immediately after removing the protective film.
• Design: Spigen changed how the outer band fits on the case versus the standard NeoHybrid. This means you can’t swap it out with the regular version. Fingerprints will show, and it is nearly impossible to keep sand and dirt from getting under the case. This can be seen in the pictures. Dirt will find a way in and scratch your phone.
• Protection: There is virtually no face-down protection. If you think the phone without a case is slippery, then you won’t like how slick the case is. Any drop protection you get is trivial, so expect the worst in that scenario.
• Buttons: All buttons are responsive enough to use on a daily basis without many complaints. The power and Bixby buttons can be a little stiff at times if not pressed at the proper angle.
• Value: There are much better cases out there unless you insist on a mediocre hybrid styled case within this price range.
• Overall: Spigen has yet to address all of the issues plaguing their NeoHybird series. There have been some improvements in terms of button response, and styling, but the case needs work.

Spigen Rugged Armor

THE GOOD

THE NOT SO GOOD

• Price: $12 (S8, S8+)
• Colors: Black
• Design: This year’s Spigen Rugged Armor falls short compared to past iterations. I first tried using the case with a screen protector, only to end up ruining the film and cause my screen protector to be pushed up. Things were worse without the screen protector. Spigen could remedy their screen protector incompatibility by having less overlap on the front/sides of the phone; most other TPU cases manage to do this perfectly. The style of the case itself has not changed. You will find the same faux carbon fiber styling alongside the top/bottom portions of the case. Their choice of TPU material will show wear after a few days use. Some of these marks will wipe off, others remain indefinitely.
• Protection: This case can handle some large drops. Spigen claims the case is MIL-Grade rated, whatever that means. Normally, companies will use the MIL-STD 810G-516.6 rating. According to their website, the phone is dropped 26 times from 4 feet. I can say I've never broken a phone in a Rugged Armor case, even after some large drops.
• Buttons: The buttons are stiff and an offer an unpleasant feel.
• Value: For the money, I would buy Caseology’s Vault II instead, as it offers the same or more protection with a better design.
• Overall: Subtle issues ruined this case for me. Besides not working with several case friendly screen protectors, the stiff buttons kept this case on my shelf.

Otterbox Strada

THE GOOD

THE NOT SO GOOD

• Price: $ 35-60 (S8, S8+)
• Colors: Brown, Black
• Type of case/material: To maintain the classic Otterbox drop protection, some compromises were made in the overall construction. There is real leather surrounding whatever proprietary material Otterbox uses. I inquired whether it’s more of a TPU or rubber base; Otterbox declined to answer my question.
• Design: One of the most important aspects of any folio case is how it keeps itself closed. Magnets are always better than any other clasp. I dropped my S8+ without the magnet letting go, thankfully. Nothing is particularly bulky, making the folio very slim relative to what you might expect. The contrast stitching adds a level of sophistication to the already classy leather. You can talk with the folio closed without any audio issues, which is a necessity when using a folio case. You don’t have the hassle of having to hold it open while talking.
• Protection: I expect better protection from this case than several other Otterbox offerings. The folio will help protect your screen during impacts while also looking nice.
• Buttons: The buttons work great, except when the folio is closed. Only one card will fit due to the design, which is a bit of a flaw in a case such as this.
• Value: Currently no other folio comes close to what Otterbox has to offer, making this case well worth the money if it fits your needs.
• Overall: The Strada has quickly become my go to folio case at the office. I found the nice combination of protection and style to be rather fitting for those of us on the go.

Tech 21 EVO Wallet

THE GOOD

THE NOT SO GOOD

• Price: $50 (S8, S8+)
• Colors: Black
• Type of case/material: This uses the tried and true EVO case design, but with a few changes. Tech 21 removed the larger folio flap and its magnetic closure. I was disappointed to see such a great design go south.
• Design: The folio is removable, and this would likely be a convenience to most, as folio cases do not fit every situation. I found this ‘feature’ to be more of a gimmick, though, and it really ruined the case for me. Even though this allows the case to be used with or without the folio, replacing the folio using the provided panel is a hassle, and almost not worth doing. The panel also interferes with what was a fluidly designed case. The new clasp is cumbersome and rather annoying to use compared to last year’s magnetic flap, which was easier to manipulate. While using the case, there’s also not a way to secure the folio flap. This is a little awkward while texting or typing something. Finally, the EVO Wallet offers two card slots, an advantage over the Otterbox Strada.
• Protection: The shared platform between Tech 21's EVO line means this case will offer great drop protection. When you add in more front protection from the folio I expect this case to handle drops like a champ.
• Buttons: Every button is very stiff from the start, although they should break in with use.
• Value: There isn't a good reason to buy this over their excellent EVO check case when the folio is a mess. I would save the $10 and simply buy the regular version, or an Otterbox Strada if you need a folio.
• Overall: Tech 21 tried too hard with the EVO Wallet this year. I enjoyed the previous design with its wraparound flap, better closing mechanism, and styling. I can't recommend this case when it seems unfinished with all of the issues I found.

Supcase Beetle Hybrid

THE GOOD

THE NOT SO GOOD

• Price: $13 (S8, S8+)
• Colors: Black/Frost, Blue/Frost, Black/Black
• Type of case/material: Hybrid, Acrylic/TPU
• Design: Looking at the case you will see the obvious ugly faux ‘screws’ or whatever you call them planted in each corner. I couldn’t stand UAG’s implementation of this ‘rugged’ styling and that hasn’t changed here. Still, I think this case has more redeemable qualities when compared to UAG's Monarch. Supcase’s decision to use a frosted back panel is welcome because true clear cases show too much dirt. This frosted panels is also sturdier due to its acrylic construction, versus polycarbonate in most other cases. Along the sides, there is an indent making the phone feel smaller without sacrificing drop protection. There is also some nice ribbed texture along the sides adding more grip. Both the top and bottom are reinforced by thicker TPU to protect your phone. The case really shines when you hold and use it. Despite being rather large looking, it feels thin and small thanks to its unique design. Branding is kept to a minimum with the logo only visible on a tiny section at the bottom. While I prefer no branding on any case’s back, keeping it minimal is acceptable.
• Protection: As with all of the Beetle series cases you can expect good drop protection. I've had numerous drops with their cases over the years and never broken a phone, or screen to date.
• Buttons: You will find a satisfying click with every press of each button.
• Value: Supcase's Beetle stands out in the hybrid segment by offering a robust design for a good price.
• Overall: I'm happy to see companies stick to a design that works instead of trying to reinvent the wheel every year. Supcase kept their design consistent making the case great like it has been for years.

Evolutive Rhino Shield Bumper

THE GOOD

THE NOT SO GOOD

• Price: $25 (S8+)
• Colors: Black, Blue, Gray
• Type of case/material: Bumper, in-house designed TPU/polycarbonate
• Design: This is my second bumper from Evolutive, the first was for my Nexus 6P. Their design and material choices haven’t changed which presents a multitude of issues. First, the bumper is incredibly flimsy. Yes, I’m aware it’s just a bumper (i.e. minimal material), but it seems like it'll fall off if I look at it wrong.
• Protection: Despite the claims Evolutive is making, I find it hard to fathom how the bumper will protect your phone. I’ve used many cheap cases and bumpers over the years and none have ever been this awful. The case fits so loosely I could use it as a slingshot. The bumper really doesn’t offer any protection (it will come off if I drop my phone, guaranteed).
• Buttons: Button presses are near impossible without a pair of pliers or a hammer.
• Value: I would rather burn $25 than spend it on a case this worthless.
• Overall: I understand the appeal of bumpers, yet I cannot justify putting my $850 phone in one when it won’t properly protect it like my cheap TPU cases. Let’s not forget how sharp the edges feel which make holding or using your phone nearly impossible. I did find the finish on their material to feel somewhat nice when not slicing myself on it.

Ringke Slim

THE GOOD

THE NOT SO GOOD

• Price: $10 (S8, S8+)
• Colors: SF Black, Coral Blue, Frost Mint, Frost Pink, Frost Clear, Frost Gray, Frost Blue, Gold
• Type of case/material: There are enough colors offered to make a rainbow, which is good news if you want your phone to break in style. I went for the SF (soft feel) black version because it reminds me of the awesome finish Google used back on their Nexus 5. While the finish feels great, it’s not without flaws. Oils and fingerprints will show easily, and the slipper texture will make the case fly out of your hand.
• Design: Since the case is so thin, cutouts are offered for the buttons to make your life easier. The downside to these cutouts and the strange lanyard hole is dirt. Dust, dirt, and everything in-between will find its way inside your case. No opening is too small for some form of nasty stuff to wander in and scratch your phone.
• Protection: Other than scratch protection this case will not offer any real impact resistance unless you're dropping your phone on a pillow.
• Buttons: I encountered no issues with the cutouts.
• Value: There are many slim cases, although even with all of the Ringke Slim's issues I find it worth the money.
• Overall: I wouldn’t use this case unless you’re solely looking for minimal scratch protection (if you live in a vacuum) and no drop protection.

Mophie Charge Force

THE GOOD

THE NOT SO GOOD

• Price: $50 (S8, S8+)
• Colors: Black
• Type of case/material: Leather-wrapped TPU with embedded magnets
• Design: Unlike other leather cases on the market, Mophie adds some nice features to their Charge Force case. First, you will find a relatively nice quality of leather. It's quite soft (sometimes a little sticky when it gets warm), adding a fair amount of grip. Next, there are embedded magnets which are used for the case's unique charging feature. Sold separately ($50) is a small wireless charging capable 3000mAh battery. It magnetically attaches to the case and allows you to charge your phone when needed. The best part is there's no added bulk when not using the battery since you can simply take it off. One small issue with the battery I noticed is the awful microUSB charging port. Not only is the port itself outdated, fitting a standard cable is a challenge. The port is very tight, making charging the battery a bit of a hassle. I managed to get a 47% (1645mAh) charge from the 3000mAh battery giving you a 54.8% efficiency. The phone was not used at all while charging in order to get a good baseline. I did find the magnets to sometimes interfere with Samsung Pay during my use, which was rather frustrating.
• Protection: I found this case to provide ample drop protection between the TPU and the leather. Out of the few drops I had, there was no damage to my S8+.
• Buttons: Adding to what I like about this case, all buttons functioned perfectly with great feedback.
• Value: This case is unique in its offering. I found its price to be perfectly reasonable for a decent quality leather case, though you have to spend another $50 to get the battery pack you almost definitely want if you're buying one of these.
• Overall: I wasn't sure what to expect from Mophie given the new style of case, and separate battery. This case pleasantly surprised me by offering protection, style, and effortless charging on the go. The leather isn't what I would call great, but it's certainly better than other cases I've used in the past. I would definitely consider buying this case for my future phones. Hopefully more colors will be offered by then.

Mophie Juice Pack

THE GOOD

THE NOT SO GOOD

• Price: $100 (S8, S8+)
• Colors: Black
• Type of case/material: Battery case, plastic/soft feel finish.
• Design: Mophie has given the S8/S8+ their standard iteration of a battery case. Outside you will find 4 small white LEDs that will indicate what charge is left on the battery and a small button to illuminate them. The case can be used with any wireless charger, but it will not fast charge like the phone itself. If you plug the case in, the phone and case will fast charge, however. As in the Charge Force case, there are magnets on the Juice Pack that allow you to attach another small battery to charge your phone. Because of this, there will still be issues with Samsung Pay by design due to the magnets. The integrated battery is 3300mAh allowing for a ~65% charge (2275mAh) while the phone was not used giving you a 63.6% efficiency. Holding the phone isn't awful with the Juice pack on, despite it being quite heavy, and you have full access to the screen edges. Mophie does not include an extender for the 3.5mm jack -they should because of how deep the port is recessed.
• Protection: When first using the case I accidentally dropped it onto the ground in a parking lot. There was minimal damage overall, and my phone was fine. I would expect the phone to hold up well given the thickness of the case unless dropped on its face. No case will really help you there due to the phone's curved display.
• Buttons: The buttons functioned even better than those in the Charge Force case.
• Value: There are only a few other battery case makers around. Mophie is the best in terms of quality, although you get what you pay for. ZeroLemon does have one in the works with a 6300mAh battery, but who really wants to literally carry a brick? This case is manageable, works well, and most likely worthwhile for your average person.
• Overall: Spending $100 on a case is no small amount, even for the large battery you get. I would take their Charge Force over the Juice Pack any day based on my personal usage. a coworker of mine has both his personal and work phones in Mophie Juice packs. He likes them in case he forgets to charge his phone, or can't plug it in while on the go. If you're that type of person, definitely consider getting this case. Either way, the addition of wireless charging is a nice touch to an otherwise normal battery case.

This post will be continuously updated with more cases as I receive them. Here is a list of cases that will be added in the near future.

• Spigen Slim Armor CS
• Spigen Wallet S
• Spigen Slim Armor
• Spigen Tough Armor
• Spigen Thin Fit
• Spigen Rugged Armor Extra
• Spigen Liquid Air Armor
• Spigen Ultra Hybrid
• Spigen Air Skin
• Caseology Vault II
• Caseology Legion
• Caseology Vault I
• Caseology Fairmont
• Ringke Oynx
• Ringke Flex S
• CM4 Q Card Case
• Moshi Napa
• Moshi Vitros